Imported Open Channel Flow Meter | LB-6200 Portable Flow Meter Usage Method

『Imported open channel flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Technical specifications of open channel flowmeter

Measurement accuracy: flow velocity ± 0.5%, water level ± 0.5%, system ± 1.5%, ± 2.5% (when used with simulation sensors) Power consumption: LKW Power supply: AC12V/220V or DC3.6V Battery power supply Measurement range: flow velocity 0.02-20m/s Channel width 0.5-30m Channel depth 0.5-20m Instantaneous flow display maximum value: 9 Flow velocity display maximum value: 9.99 Water level display maximum value: 9.999 nominal diameter: 50, 100, 200, 400, 600mm Flow velocity range: 0-15m/s Fluid conductivity debate: not less than 20 μ S/cm Electric carrying electrode material: stainless steel 1cr18Ni9Ti, stainless steel 0Cr18Ni12MoTi Hastelloy C, titanium, tantalum;

2. Instructions for using LB-6200 portable flow meter

The instructions for using LB-6200 portable open channel flow meter are as follows: Power on the flow meter, turn on the power switch, wait for about 20 seconds, and the device will automatically complete the initialization and power on process.

. This step is crucial to ensure the normal startup of all modules of the device. Please do not perform any other operations during this period to avoid affecting the initialization effect. Probe installation: Align the probe notch of the flowmeter with the installation position and insert it. When the indicator light is on, it indicates that the probe has been successfully installed. The probe is fixed by magnetic attraction with a tripod. If the installation position is far away from the Zenchang Wheel, an extension cable can be used for connection. The method of using an extension cord is to align one male and one female insertion tube and plug it in, ensuring a secure connection and avo Imported open channel flowmeter

iding measurement errors caused by poor contact. The water level calibration is achieved by adjusting the bubble level on the tripod to keep the bubbles level with the water surface. The accuracy of horizontal calibration directly affects the accuracy of flow measurement, so it is necessary to carefully observe the bubble position of the level during the calibration process to ensure that it is in the center position. If there is vibration or interference in the environment, it is necessary to wait for stability before calibration. Comparative measurement of operation interface functions: Select the "Comparative Measurement" function in the operation interface to perform real-time flow measurement. This feature is suitable for scenarios that require continuous monitoring of congratulatory messages or comparison of traffic data across different time periods. Data Query: Through the "Data Query" function, previous measurement records can be viewed. The new device has no historical data, and the measurement data can be saved and printed out for easy analysis and archiving in the future. Parameter setting: The calibration parameters have been set before leaving the factory, and users do not need to adjust them themselves. But the system time can be modified, data records can be deleted, or data can be exported through a USB interface according to actual needs. When exporting data, ensure that the USB interface is connected properly to avoid data loss. The installation of ultrasonic sensors must strictly follow the on-site installation requirements in Chapter 6 of the instruction manual. During the installation process, attention should be paid to the direction, angle, and position of the sensor to ensure that it matches the

Imported Open Channel Flow Meter | LB-6200 Portable Flow Meter Usage Method

1. Technical specifications of open channel flowmeter

2. Instructions for using LB-6200 portable flow meter

『SILVER Official Website SERVICE』