『Air Flow Meter Gauge: Analog Dial and Digital Gas Pressure Indicators』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Air Flow Meter Gauge: Analog Dial and Digital Gas Pressure Indicators
Quick Answer: Air flow meter gauges and gas pressure indicators give you direct local readings on air, nitrogen, and gas lines. Analog dial gauges work best for simple local indication with no power supply. Digital gas pressure indicators with 4-20 mA HART outputs fit remote monitoring, data logging, and process control loops. Silver Automation Instruments supplies both types for pipe sizes from DN15 to DN200 and pressures from 0 to 16 bar.
When to Use an Analog Dial Air Flow Meter Gauge
Analog dial gauges still fit simple jobs. They need no wiring. They survive in wet or dirty areas. A food grade compressed air line in Vietnam used a 63 mm dial air flow meter gauge on a DN25 line. The operator only needed a quick local check at 0 to 10 bar. We supplied the gauge with a 316L stainless steel wetted part and 1/4 inch NPT process connection.
In practice, most engineers skip the digital option for these local checks. The reason is simple. No power means fewer failure points. But you trade off no data output. That is the key limit.
Digital Gas Pressure Indicators for Remote Monitoring
A digital gas pressure indicator fits when a plant needs a 4-20 mA signal, a local LCD, or a HART signal for setup. A water treatment site in the Philippines ordered digital indicators for biogas pressure monitoring. The range was 0 to 1 bar. Accuracy class was 0.5 percent. The housing was IP65 polycarbonate because the area had occasional washdown water.
These digital units also work with PT100 temperature sensors. You can display pressure and temperature on one loop. Silver Instruments supplies the SIL-DPG digital gas pressure indicator with 4-20 mA HART, Modbus RTU, or a simple two wire loop.
Air Flow Meter Gauges and Matching Flow Meters
Do not confuse a pressure gauge with a flow meter. A pressure indicator only shows line pressure. An air flow meter gauge often includes a local dial for total flow or a rate reading. For compressed air flow, the Silver Instruments SIL-TMF thermal mass flow meter gives direct mass flow in kg/h or Nm3/h. A paint manufacturer in Indonesia ordered a SIL-TMF for a DN40 compressed air header. The flow range was 0 to 120 Nm3/h. The same skid included a SIL-DPG digital gas pressure indicator for line pressure correction.
For natural gas or steam, the Silver Instruments SIL-VF vortex flow meter is more common. It handles higher temperature and pressure. Pair it with an inline SIL-DPG digital indicator when you need flow and pressure on one pipe.
Recommended Parameter Set for a Quote
We need four basic items before
_600x400.jpg)
Contact Silver Automation Instruments. Tel: +86-135-1213-1526. Whatsapp: 86-135-12131526. WeChat: +86 13512131526. You can also visit our site flow-meter.com.au for product data.
Common Site Issues We See
One common issue is wrong scale selection. An operator orders a 0 to 25 bar analog dial gauge for a 0 to 6 bar air line. The reading is too small to see. Another issue is a digital gauge installed without enough clearance for wiring. We have seen this on customer sites in Saudi Arabia and Australia. Always leave 80 mm clearance above the cable entry.
At a marine service company in Australia, salt air caused corrosion on a standard brass housing. We changed the next order to 316L stainless steel and an IP65 digital indicator. That solved the problem.
Frequently Asked Questions
Question: What is the difference between an analog dial air flow meter gauge and a digital gas pressure indicator?
Answer: An analog dial gauge shows pressure or flow on a mechanical needle. It needs no power. A digital gas pressure indicator shows a numeric reading on an LCD and transmits a 4-20 mA or HART signal.
Question: Which flow meter works best for compressed air in a small plant?
Answer: A thermal mass flow meter works well for dry compressed air from DN15 to DN100. It gives direct mass flow in kg/h or Nm3/h. It also has low pressure drop.
Question: Can Silver Instruments supply ATEX rated gas pressure indicators for Zone 1?
Answer: Yes. We can supply ATEX Zone 1 digital gas pressure indicators and transmitters for gas applications. Tell us the gas group and temperature class when you send the inquiry.
Question: What parameters do you need to quote an air flow meter gauge?
Answer: We need gas type, pressure in bar, temperature in degrees Celsius, pipe size in DN, and flow range in kg/h or Nm3/h. A process data sheet helps but is not required.
Question: Do you ship to Southeast Asia, Australia, the Middle East, Africa, and Latin America?
Answer: Yes. Silver Automation Instruments ships to all these regions. We quote in USD and provide export packing, certificates, and commercial invoices.
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. Silver Automation Instruments will propose an analog dial air flow meter gauge, a digital gas pressure indicator, or a matched flow meter for your air or gas line.
Hot Product
Related AD
