Specifications of Rotary Flow Meter | LZB-80 Glass Rotary Flow Meter Description

『Specification of rotor flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Main technical parameters of metal rotor flowmeter

(1) Basic measurement range: Water (20 ℃) 2.5-150000L/h Air (20 ℃ key type, 0.1013MPa) 0.07-4000Nm3/h Range ratio: 10:1 Accuracy

1.5/2.5 Working pressure: ≤ 6.4MPa Working temperature: -40~350 ℃ (fluoroplastic lining -10~80 ℃) Environmental temperature: -20~80 ℃ Medium viscosity: DN15 ≤ 5mPa. SDN25~DN150 ≤ 250mPa. S Pipe body material: 1Cr18Ni9Ti, 316L, lined with PTEF, etc. Process connection: flange, or according to the steam provided by the user. Head: flange, DN15/PN1.6， Or as provided by the user

(2) Remote transmission device ① GD 5W1-1 angular displacement transmitter basic error

1.5% F.S output signal: 4-20mA load impedance: 350 Ω power supply voltage: 24VDC ambient temperature: -30~80 ℃ outlet: M20 × 1.5 explosion-proof mark: ExibIICT4 ② GD E-HD transmitter power supply influence:<0.1% (excluding digital resolution [70 μ A]) load influence:<0.1% (excluding digital resolution [70 μ A]) current loss: 4-21.6mA, 0% relative to the measured value load impedance: 0-800 Ω working voltage: 12.8-30VCD two-wire Rext [K Ω]=(Power supply [V] -12.7)/22mA output signal: 4-20mA ambient temperature: -25~80 ℃ outlet: M20 × 1.5 explosion-proof mark: ExibIICT6 measurement range: water (20 ℃) 2.5-150000L/h, air (20 ℃, 0.1013MPa) 0.07-4000Nm3/h range ratio: 10:1 accuracy

1.5/2.5 Working pressure: ≤ 6.4MPa Working temperature: -40~350 ℃ (fluoroplastic lining -10~80 ℃) Environmental temperature: -20~80 ℃ Medium viscosity: DN15 ≤ 5mPa. S, DN25~DN150 ≤ 250mPa. S Pipe body material: 1Cr18Ni9Ti, 316L, lined with PTEF, etc. Process connection: flange, or according to the users preferred steam sleeve: flange, DN15/PN1.6， Or according to the speci

fications provided by the user for the LZ series metal rotor flowmeter: through diameter (mm) flow range pressure loss kPa water L/h * air M3/h * water air conventional type anti-corrosion conventional type, Anti corrosion type 15 2.5~25---0.07~0.7 6.5 7.1 4.0~40 2.5~25 0.11~1.1 6.5 7.2 6.3~63 4.0~40 0.18~1.8 6.6 7.3 10~100 6.3~63 0.28~2.8 6.6 7.5 16~160 10~100 0.40~4.0 6.8 8.0 25~250 16~160 0.7~7.0 7.2 10.8 40~400 25~250 1.0~10 8.6 10.0 63~630 40~400 1.6~16.0 11.1 14.0 25 100~1000 63~630 3~30 7.0 7.7 160~1600 100~1000 4.5~45 8.0 8.8 250~2500 160~1600 7~70 10.8 12.0 400~4000 250~2500 11~110 15.8 19.0 40 500~5000---12 ～ 120 10.8 9.8 600 ～ 6000---16 ～ 160 12.6 16.5 50 630 ～ 6300 400 ～ 4000 18 ～ 180 8.1 8.6 1000 ～ 10000 630 ～ 6300 25 ～ 250 11.0 10.4 1600 ～ 16000 1000 ～ 10000 40 ～ 400 17 .0 15.5 80 2500～25000 1600～16000 60～600 8.1 12.9 4000～40000 2500～25000 80～800 9.5 18.5 100 6300～63000 4000～40000 100～1000 15.0 19.2 150 20000～100000 --- 600～3000 19.2 20.3

2. The measurement range of a rotor flowmeter is very wide. The measurement range of the root selling spine varies depending on different working conditions and fluid types. Here are some key points about the measurement range of the rotor flowmeter: corrosion-resistant rotor flowmeter: diameter DN 15: air flow range of 0.07~0.7 m3/h, water flow range of 2.5~25 L/h. DN 160: The air flow rate range is 0.40-4.0 m3/h, and the water flow rate range is 16-160 L/h. DN 250: The air flow rate range is 0.70-7.0 m3/h, and the water flow rate range is 25-250 L/h. Note: The flow range for DN 16 here is given in kPa units, which is clearly incorrect and should be in flow units. However, to maintain the original meaning, no changes have been made. In pract

Specifications of Rotary Flow Meter | LZB-80 Glass Rotary Flow Meter Description

1. Main technical parameters of metal rotor flowmeter

『SILVER Official Website SERVICE』