Current position > Contact Us
Rosemount Magnetic Flow Meters & Rosemount Mag Meters are workhorse process elements for water, wastewater, chemical, food, and utility plants. They measure conductive liquids across common line sizes and deliver 4-20 mA HART signals to PLC and DCS systems. Silver Automation Instruments supplies compatible electromagnetic flow meters for the same process conditions, often with shorter delivery to Southeast Asia, Oceania, Latin America, Africa, and the Middle East.
Most engineers know the Rosemount 8700 series. Rosemount, part of Emerson, has a large installed base in water, chemical, and food plants. The 8705 flanged sensor and 8712 transmitter appear in water plants, chemical dosing skids, and food process lines. The 8732 integral mount model saves space on small pipe racks. The 8750W utility mag meter handles raw water, effluent, and municipal flow loops. These units are not exotic instruments. They are installed in DN15 to DN900 lines, with flanged, wafer, and sanitary connections.
Process conditions vary widely. A water treatment plant in the Philippines may run a DN300 Rosemount 8750W at 0.8 bar and 32 °C. A chemical plant in Saudi Arabia may use a PTFE lined 8705 on a DN50 acid line at 5 bar and 90 °C. The same basic flow tube and transmitter design works in both places because the process elements are selected for each fluid.
A magnetic flow meter is not one piece. It is a set of process elements. The flow tube contains the liner and electrodes. The liner isolates the fluid from the metal tube. The electrodes pick up the voltage generated by the conductive liquid moving through the magnetic field. The transmitter converts that signal into a flow reading.
Liner choice drives most buying decisions. PTFE and PFA liners suit aggressive chemicals and temperatures up to 150 °C. Neoprene and polyurethane liners suit water, seawater, wastewater, and light slurry. Electrode material also matters. 316L stainless steel is common for water. Hastelloy C and titanium handle seawater and chemical streams. Tantalum and platinum fit strong acids and other aggressive media. Grounding rings, empty pipe detection, and built in diagnostics complete the process element list.
Rosemount mag meters appear in desalination plants, cooling water loops, effluent discharge, chemical batching, and food and beverage lines. A seawater flow meter for desalination plant duty is common in the Middle East and Australia. Raw water measurement in Vietnam, Indonesia, and the Philippines uses flanged mag meters with neoprene liners. Chemical plants in Latin America and Africa use PTFE lined units for acid and caustic transfer.
In practice, most maintenance teams want a direct replacement for an aging Rosemount meter. They do not want to cut pipe or change flanges. That is why face to face length and flange standard matter more than brand name. A DN80 PN16 meter from one supplier and a DN80 PN16 meter from another supplier should fit the same spool if the face to face dimension matches.
Silver Automation Instruments builds electromagnetic flow meters for the same process conditions. Our standard flanged sensors cover DN10 to DN2000. We supply PTFE, PFA, neoprene, and polyurethane liners. Electrode options include 316L, Hastelloy C, titanium, tantalum, and platinum. Signal output is 4-20 mA HART with pulse and RS485 Modbus options. ATEX Zone 1 and Zone 2 versions are available for hazardous areas.
For a DN50 acid line, specify PTFE liner and Hastelloy C electrodes. For a DN150 raw water line, specify neoprene liner and 316L electrodes. For seawater pipe above DN200, specify polyurethane liner and titanium electrodes.
Here is a specific case. Last year a customer in Vietnam replaced two Rosemount 8750W meters on a DN150 raw water line. The fluid conductivity was 310 µS/cm. The site ran 4-20 mA HART to a local PLC. We supplied two flanged mag meters with neoprene liners and 316L electrodes. Face to face length matched the old units. The plant did not cut pipe or modify cable conduits. Delivery from our China factory to Vietnam took 11 days by air freight.
We saw a similar job in the Philippines for a food plant using Rosemount sanitary mag meters. The replacement had PFA liner and 316L electrodes with tri clamp connections. The customer sent us the old model code and pipe size. We confirmed the fitting type, temperature, and CIP chemical exposure before shipment.
Rosemount and Emerson support is strong, but replacement parts and delivery can stretch lead times in some regions. Silver Instruments focuses on fast turnaround for standard process conditions. A DN50 PN16 flanged meter with PTFE liner, 316L electrodes, and 4-20 mA HART output often ships in 7 to 12 days from our China factory. A custom Hastelloy electrode or nonstandard flange can add 5 to 10 days.
Most engineers skip this part and find out later. Ask for a dimensional drawing before shipment. Check the face to face length, flange drilling standard, cable entry size, and liner material. We send a drawing with every order. You verify the dimensions against the old Rosemount tag. That step prevents field rework.
Can Silver Instruments replace a Rosemount mag meter without changing pipe spool? In most cases yes. We match face to face dimensions for common Rosemount 8705 and 8750W models. Send us the model code, flange standard, pipe size DN, and face to face length. We confirm before shipment.
What conductivity is required for a magnetic flow meter? Standard installations work above 5 µS/cm. Some process fluids with 1 to 5 µS/cm need special electrode and calibration. Tell us the fluid type and conductivity.
What signal output do Rosemount and Silver Instruments mag meters use? Standard output is 4-20 mA with HART. Pulse output and RS485 Modbus are also available. The terminal wiring is similar. We can match your existing cable shield and grounding scheme.
What is the typical delivery time for a DN100 flanged mag meter to Southeast Asia or Australia? For a standard PN16 flanged DN100 meter with 316L electrodes and neoprene liner, we often ship in 7 to 12 days from our China factory. Air freight to Australia, Vietnam, or Indonesia takes 3 to 6 days more.
Do you supply liners for chemicals or seawater? Yes. PTFE and PFA liners are for aggressive chemicals and high temperatures. Neoprene and polyurethane liners are for seawater, wastewater, and slurry. Send us the chloride level and temperature.
Send us your pressure in bar, temperature in °C, pipe size DN, flow range, and the old Rosemount model code. We will return a replacement proposal with price, dimensional drawing, and delivery date.
Tel: +86-25-68650347
WhatsApp: +86-25-52155837
WeChat: +86 15365082610
You can also review the electromagnetic flow meter range at flow-meter.com.au.
