Current position > News detail
『Rheonik flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Which country is the rheonik flowmeter from?
The Rheinik flowmeter is from Germany.. The following is a detailed introduction by Yanyou about the Leonik Rheonik flowmeter and its production company: Production company: The Leonik Rheonik flowmeter is manufactured by Rheonik GmbH in Germany. Company location: Rheinik is located in Hamburg, northern Germany. Establishment time: The company was founded in 1958 and has a long history of research and production of flow meters. Product features: Rheonik flow meters are renowned for their high quality, precision, reliability, and long lifespan. The product is widely used in various fields such as petroleum, chemical, pharmaceutical, food, water treatment, etc. Flow meters come in various models and specifications to meet the needs of different fluid media, pipeline sizes, and measurement accuracy. Service Support: Rheonik Company also provides professional pre-sales consultation, in sales service, and after-sales service to ensure that customers receive timely technical support and maintenance during use.
2. Should the rotor flowmeter be installed horizontally or vertically?
The rotor flowmeter must be installed vertically, which is a basic specification. The principle of this type of instrument determines that it must maintain a vertical position in order to accurately measure flow. The float inside the conical tube needs to settle naturally by gravity, and the flow rate value is converted by the change in float height. If forcibly installed horizontally, the float will deviate from the friction tube wall, and the data error may exceed 20%. Long term use may also cause wear on the parts. When installing, attention must be paid to
1. Al
2. The fixing of the support frame cannot be omitted, especially when installing in a vibrating pipeline, it needs to be separately fixed with a metal bracket to avoid fiber interference and resonance interference
3. Reserve more than 15cm of maintenance space for easy disassembly and cleaning of impurities in the later stage, such as tar accumulation in gas pipeline flow meters. Special designed horizontal installation models do exist, such as certain models of metal tube float flow meters from RHEONIK in the United States, but these products are specifically labeled with the "allow horizontal installation" label. In conventional industrial applications, about 97% of the working conditions require vertical installation. In precision scenarios such as medical oxygen production and beer filling lines, the tilt angle error must be controlled within ± 2 degrees. It needs to be clarified by Lu Yu that although the electronic rotor flowmeter reads the float position through sensors and has higher installation freedom, the mechanical structure still needs to be kept basically vertical. The dual magnetic coupling flowmeter launched by some manufacturers has broken through the conventional limitations, and the manual of these new products will clearly indicate the installation posture compensation parameters.